Grundfos ap
UNILIFT AP12.40.06.A1
£1,454.32 £1,090.74 Add to cart
Sale!

UNILIFT AP12.40.06.A1

£1,090.74

-25%

Suitable for

  • Domestic wastewater

UNILIFT AP12 is a stainless-steel submersible pump designed for pumping non-aggressive water and grey wastewater with particles up to 12 mm. It can be used as a portable unit or stationary installation.

UNILIFT AP12.40.06.A1
Submersible drainage pump type

Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 1-phase totally enclosed motor in insulation class F with thermal overload protection.

The pump is fitted with suction strainer and level switch for automatic start and stop.

The impeller is a SEMI OPEN impeller for groundwater, surface water, rain water and similar.

The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.

The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life ball bearings.

The pump is ready for use as it is fitted with carrying handle and is supplied with a 10 m mains cable. The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings.

 

Product Details
Manufacturer Grundfos
Product Unilift AP Submersible Pump Waste with Float Switch
Product code (SKU) 96404180
Product Model Grundfos Unilift AP 12.40.06.A1
Performance Data
Data 1 Max Flow: 5.8 l/sec
Data 2 Max Head: 13 m
Data 3 Cable Length: 10 m
Features
Material Stainless Steel
Voltage 240v 1Ph 50HZ

Product Specifications

LIQUID:
Liquid temperature range: 0 .. 55 °C
Density: 998.2 kg/m³
TECHNICAL:
Maximum flow: 5 l/s
Type of impeller: SEMI OPEN
Max. Particle: 12 mm
Approvals: CE,RCM,VDE,LGABG,EAC,TUVRHWID,MORO,UKCA,CNROHSEXP,SEPRO
MATERIALS:
Pump housing: Stainless steel
EN 1.4301
AISI 304
Impeller: Stainless steel
EN 1.4301
AISI 304
Cable union: Brass
CW602N
C35330
INSTALLATION:
Range of ambient temperature: 0 .. 55 °C
Type of connection: Rp
Size of connection: 1 1/2 inch
Maximum installation depth: 7 m
Place of installation: Indoor/outdoor
ELECTRICAL DATA:
Power input P1: 0.9 kW
Motor type 1-phase: PSC
Rated power – P2: 0.6 kW
Mains frequency: 50 Hz
Rated voltage: 1 x 230 V
Rated current: 4.4 A
Cos phi – power factor: 0.99
Rated speed: 2785 rpm
Capacitor size – run: 16 µF/400 V
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Length of power cable: 10 m
Type of cable plug: NONE
OTHERS:
Net weight: 12.2 kg
Gross weight: 13.3 kg
Country of origin: HU
Custom tariff no.: 84137021
Environmental approvals: WEEE

Reviews

There are no reviews yet.

Be the first to review “UNILIFT AP12.40.06.A1”

Your email address will not be published. Required fields are marked *