UNILIFT AP35.40.08.A1V
UNILIFT AP35.40.08.A1V
£1,773.38 £1,330.04 Add to cart
Sale!

UNILIFT AP35.40.08.A1V

£1,330.04

-25%
Suitable for

  • Commercial wastewater
  • Domestic wastewater

UNILIFT AP35 is a stainless-steel submersible pump designed for pumping non-aggressive water and grey wastewater with particles up to 35 mm. It can be used as a portable unit or stationary installation.

UNILIFT AP35.40.08.A1V
Submersible drainage pump type

Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 1-phase totally enclosed motor in insulation class F with thermal overload protection.

The pump is fitted with suction strainer and level switch for automatic start and stop.

The impeller is a VORTEX impeller for groundwater, surface water, rain water and similar.

The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.

The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life ball bearings.

The pump is ready for use as it is fitted with carrying handle and is supplied with a 10 m mains cable. The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings.

Product Specifications

LIQUID:
Liquid temperature range: 0 .. 55 °C
Density: 998.2 kg/m³
TECHNICAL:
Maximum flow: 5 l/s
Type of impeller: VORTEX
Max. Particle: 35 mm
Approvals: CE,RCM,VDE,LGABG,EAC,TUVRHWID,MORO,UKCA,CNROHSEXP,SEPRO
MATERIALS:
Pump housing: Stainless steel
EN 1.4301
AISI 304
Impeller: Stainless steel
EN 1.4301
AISI 304
Cable union: Brass
CW602N
C35330
INSTALLATION:
Range of ambient temperature: 0 .. 55 °C
Type of connection: Rp
Size of connection: 1 1/2 inch
Maximum installation depth: 7 m
Place of installation: Indoor/outdoor
ELECTRICAL DATA:
Power input P1: 1.2 kW
Motor type 1-phase: PSC
Rated power – P2: 0.7 kW
Mains frequency: 50 Hz
Rated voltage: 1 x 230 V
Rated current: 5.5 A
Cos phi – power factor: 0.98
Rated speed: 2795 rpm
Capacitor size – run: 16 µF/400 V
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Length of power cable: 10 m
Type of cable plug: NONE
OTHERS:
Net weight: 13.9 kg
Gross weight: 15.1 kg
Country of origin: HU
Custom tariff no.: 84137021
Environmental approvals: WEEE